Recirculation
|
The AT Series, AP Series and APFM Series pumps have all been designed for recirculation applications, IE midrange supply pressures, low pulsation and low suction lift.
·
|
For elevated temperatures (100°-210° Celsius) select AT Series.
|
·
|
For ambient (under 100° Celsius), all PTFE/PFA wet surfaces, some polypropylene in non wetted areas and air side ceramic sleeve and spool select AP Series.
|
·
|
For ambient (under 100° Celsius), all PTFE/PFA wet surfaces, all PTFE/PFA non wetted areas and air side ceramic sleeve and spool select APFM Series.
|
|
Chemical Delivery
|
Visit our Facilitator overview to find our about Chemical Delivery
|
Slurry
|
Visit our Facilitator overview to find our about Slurry
|
Extended Warranties
|
The AT Series, AP Series and APFM Series pumps are the same as the AT Series, AP Series and APFM Series pumps with reduced inlet and outlet orifices to reduce flow, thereby slowing down the pump and lengthening its life.
·
|
For elevated temperatures (100°-210° Celsius) select ATEXT Series.
|
·
|
For ambient (under 100° Celsius), all PTFE/PFA wet surfaces, some polypropylene in non wetted areas and air side ceramic sleeve and spool select APEXT Series.
|
·
|
For ambient (under 100° Celsius), all PTFE/PFA wet surfaces, all PTFE/PFA non wetted areas and air side ceramic sleeve and spool select APFMEXT Series.
|
|
|
